B&K Precision 2552-2559 - Programming Manual - Manual (Page 62)

62
DESCRIPTION The INTENSITY command sets the intensity
level of the grid or the trace.
The intensity level is expressed as a
percentage (PCT). A level of 100 PCT
corresponds to the maximum intensity whilst
a level of 0 PCT sets the intensity to its
minimum value.(The minimum value of the
trace is 30 PCT)
The response to the INTENSITY? Query
indicates the grid and trace intensity levels.
COMMAND SYNTAX
INTenSity GRID, , TRACE,
: = 0(or 30) to 100 [PCT]
Note 1: Parameters are grouped in pairs. The
first of the pair names the variable to be
modified, whilst the second gives the new
value to be assigned. Pairs may be given in
any order and be restricted to those variables
to be changed.
Note 2: The suffix PCT is optional.
QUERY SYNTAX INTenSity?
RESPONSE FORMAT INTenSity TRACE, , GRID,
EXAMPLE The following instruction enables remote
control of the intensity, and changes the grid
intensity level to 75%:
Command message:
INTS GRID, 75
DISPLAY INTENSITY, INTS
Command /Query