B&K Precision 2552-2559 - Programming Manual - Manual (Page 50)

50
DESCRIPTION The FILTER command enables or disables filter of
the specified trace.
The response to the FILTER? query indicates
whether the filter of specified trace is enabled
COMMAND SYNTAX
:FILTER
: = {C1,C2,C3,C4}
: = {ON,OFF}
QUERY SYNTAX
:FILTER?
RESPONSE FORMAT
:FILTER
EXAMPLE
The following command enables the filter of
channel 1:
Command message:
C1:FILT ON
RELATED COMMANDS FILTS
FUNCTION FILTER, FILT
Command /Query