B&K Precision 2552-2559 - Programming Manual - Manual (Page 117)

117
DESCRIPTION The TRIG_MODE command specifies the trigger
mode.
The TRIG_MODE? query returns the current
trigger mode.
NOTE: STOP is a part of the option of this
command, but is not a trigger mode of the
instrument
COMMAND SYNTAX
TRig_MoDe
: = {AUTO, NORM, SINGLE,STOP}
QUERY SYNTAX
TRig_MoDe？
RESPONSE FORMAT TRig_MoDe
EXAMPLE
The following selects the normal mode:
Command message:
TRMD NORM
RELATED COMMANDS
ARM_ACQUISITION, STOP, TRIG_SELECT,
TRIG_COUPLING, TRIG_LEVEL, TRIG_SLOP
ACQUISITION TRIG_MODE, TRMD
Command /Query