B&K Precision 2552-2559 - Programming Manual - Manual (Page 28)

28
DESCRIPTION The CURSOR_SET command allows the user
to position any one of the eight independent
cursors at a given screen location. The
positions of the cursors can be modified or
queried even if the required cursor is not
currently displayed on the screen. When
setting a cursor position, a trace must be
specified, relative to which the cursor will
be positioned.
The CURSOR_SET? Query indicates the
current position of the cursor(s). The values
returned depend on the grid type selected.
Notation
HREF The time value of curA under Track cursor mode
HDIF The time value of curB under Track cursor mode
VREF The volt-value of curA under manual cursor mode
VDIF The volt -value of curB under manual cursor mode
TREF The time value of curA under manual cursor mode
TDIF The time value of curB under manual cursor mode
COMMANDSYNTAX
:CuRsor_SeT,[,ursor>,, ,]
< trace > : = {C1, C2, C3, C4}
:
={HREF,HDIF,VREF,VDIF,TREF,TDIF}
： = 0.1 to 11.9(or 17.9) DIV
(horizontal of track, the range of the
value is related to the size of the
screen
)
：= -4 to 4 DIV (vertical)
：= -6(or -9) to 6 DIV (horizontal
of manual, the range of the value is
related to the size of the screen )
QUERY SYNTAX
: CuRsor_SeT? [, …]
CURSOR CURSOR_SET, CRST
Command /Query