B&K Precision 2552-2559 - Programming Manual - Manual (Page 114)

114
DESCRIPTION The TRIG_COUPLING command sets the
coupling mode of the specified trigger source.
The TRIG_COUPLING? query returns the
trigger coupling of the selected source.
COMMAND SYNTAX
: TRig_CouPling
: = {C1, C2, C3, C4, EX, EX5,
LINE}
: = {AC,DC,HFREJ,LFREJ}
QUERY SYNTAX
: TRig_CouPling?
RESPONSE FORMAT
: TRig_CouPling
EXAMPLE
The following command sets the coupling mode
of the trigger source Channel 2 to AC:
Command message:
C2: TRCP AC
RELATED COMMANDS
TRIG_COUPLING, TRIG_DELAY,
TRIG_LEVEL, TRIG_MODE, TRIG_SELECT,
TRIG_SLOPE
ACQUISITION TRIG_COUPLING, TRCP
Command /Query