B&K Precision 2552-2559 - Programming Manual - Manual (Page 56)

56
DESCRIPTION The GRID_DISPLAY command selects the
type of the grid which is used to display.
The response to the GRID_DISPLAY? query
indicates current type of the grid
COMMAND SYNTAX
GRID_DISPLAY
< type > : = {FULL,HALF,OFF}
QUERY SYNTAX
GRID_DISPLAY？
RESPONSE FORMAT
GRID_DISPLAY < type >
EXAMPLE The following command changes the type of
grid to full grid:
Command message:
GRID_DISPLAY FULL
DISPLAY GRID_DISPLAY, GRDS
Command /Query