B&K Precision 2552-2559 - Programming Manual - Manual (Page 70)

70
DESCRIPTION The MATH_VERT_DIV command controls
the vertical sensitivity of the math waveform
of specified source. We can only set the value
of existing
The FFT waveform isn’t included.
The response to the MATH_VERT_DIV?
query indicates the specified scale of math
waveform of specified source.
COMMAND SYNTAX
MATH_VERT_DIV < scale >
< scale >:= 1PV/div ~ 100V/div.
QUERY SYNTAX
MATH_VERT_DIV?
RESPONSE FORMAT
MATH_VERT_DIV < scale >
EXAMPLE The following instruction changes the vertical
sensitivity of the math waveform of specified
source to 1V/div:
Command message:
MTVD 1V
ACQUISITION MATH_VERT_DIV, MTVD
Command /Query