B&K Precision 2552-2559 - Programming Manual - Manual (Page 107)

107
DESCRIPTION The SKEW command sets the skew value of the
specified trace.
The response to the SKEW? query indicates the
skew value of the specified trace.
COMMAND SYNTAX
:SKEW
: = {C1,C2,C3,C4 }
: = it is a value about time.
QUERY SYNTAX :SKEW?
RESPONSE FORMAT :SKEW
EXAMPLE
The following command sets channel 1 skew
value to 3ns
Command message:
C1:SKEW 3NS
ACQUISITION SKEW, SKEW
Command