B&K Precision 2552-2559 - Programming Manual - Manual (Page 130)

130
DESCRIPTION The XY_DISPLAY command enables or disables
to display the XY format
The response to the XY_DISPLAY? query
indicates whether the XY format display is
enabled.
COMMAND SYNTAX
XY_DISPLAY
：= {ON, OFF}
QUERY SYNTAX XY_DISPLAY？
RESPONSE FORMAT XY_DISPLAY
EXAMPLE
The following command enables to display the
XY format:
Command message:
XYDS
DISPLAY XY_DISPLAY, XYDS
Command /Query