B&K Precision 2552-2559 - Programming Manual - Manual (Page 13)

13
DESCRIPTION The ATTENUATION command selects the vertical
attenuation factor of the probe. Values of 1, 5, 10, 50,
100, 500, and 1000 may be specified.
The ATTENUATION? Query returns the
attenuation factor of the specified channel.
COMMAND SYNTAX
: ATTeNuation
: = {C1, C2, C3, C4}
: = {1, 5, 10, 50, 100, 500, 1000}
QUERY SYNTAX : ATTeNuation?
RESPONSE FORMAT
: ATTeNuation
EXAMPLE
The following command sets to 100 the
attenuation factor of Channel 1:
Command message:
C1:ATTN 100
ACQUISITION ATTENUATION, ATTN
Command /Query