B&K Precision 2552-2559 - Programming Manual - Manual (Page 51)

51
DESCRIPTION The FILT_SET command selects the specified type
of filter, and sets the limit value of filter.
The response to the FILT_SET? query indicates
current parameter of the filter
COMMAND SYNTAX
: FILT_SET TYPE,,
,
: = {C1,C2,C3,C4}
: = {LP,HP,BP,BR}
LP is lowpass, HP is highpass, BP is bandpass,
BR is bandreject
: = {UPPLIMIT,LOWLIMIT}
if seted the ,the must be related
QUERY SYNTAX
: FILT_SET？
RESPONSE FORMAT
:FILTER TYPE,,,
EXAMPLE
The following command changes the type of filter to
bandpass, and sets the upplimit to 200 KHz and the
lowlimit to 100 KHz:
Command message:
C1:FILTS TYPE,BP,
UPPLIMIT,200KHz,LOWLIMIT,100KHz
RELATED COMMANDS FILT
FUNCTION FILT_SET, FILTS
Command /Query