B&K Precision 2552-2559 - Programming Manual - Manual (Page 139)

_3 sparsed
_4 autoscaled
_5 no_result
_6 rolling
_7 cumulative
endenum
<320> RESERVED5: word ; expansion entry
<322> RIS_SWEEPS: word ; for RIS, the number of sweeps
; else 1
The following variables describe the basic acquisition
conditions used when the waveform was acquired
<324> TIMEBASE: enum
_0 1_ns/div
_1 2.5_ns/div
_2 5_ns/div
_3 10_ns/div
_4 25_ns/div
_5 50_ns/div
_6 100_ns/div
_7 250_ns/div
_8 500_ns/div
_9 1_us/div
_10 2.5_us/div
_11 5_us/div
_12 10_us/div
_13 25_us/div
_14 50_us/div
_15 100_us/div
_16 250_us/div
_17 500_us/div
_18 1_ms/div
_19 2.5_ms/div
_20 5_ms/div
_21 10_ms/div
_22 25_ms/div
_23 50_ms/div
_24 100_ms/div
_25 250_ms/div
_26 500_ms/div
_27 1_s/div
_28 2.5_s/div
_29 5_s/div
_30 10_s/div
_31 25_s/div
_32 50_s/div
_100 EXTERNAL
endenum
<326> VERT_COUPLING: enum
_0 DC_50_Ohms
_1 ground
_2 DC_1MOhm
_3 ground
_4 AC_1MOhm
endenum
<328> PROBE_ATT: float
<332> FIXED_VERT_GAIN: enum
_0 2_mV/div
_1 5_mV/div
_2 10_mV/div
_3 20_mV/div
_4 50_mV/div