B&K Precision 2552-2559 - Programming Manual - Manual (Page 66)

66
DESCRIPTION The INVERTSET command inverts the
specified traces or the waveform of math.
The response to the INVERTSET? query
indicates whether the specified waveform is
invert.
COMMAND SYNTAX : INVERTSET < state >
< trace > : = {C1,C2,C3,C4,MATH}
< state >:= {ON,OFF}
QUERY SYNTAX :
INVERTSET?
RESPONSE FORMAT :
INVERTSET < state >
EXAMPLE The following instruction inverts the trace of
channel 1:
Command message:
C1:INVS ON
DISPLAY INVERTSET, INVS
Command /Query