B&K Precision 2552-2559 - Programming Manual - Manual (Page 103)

103
DESCRIPTION The STORE_SETUP command controls the way
in which traces will be stored. A single trace or
all displayed traces may be enabled for storage.
COMMAND SYNTAX
STore_SeTup [, ]
: = {C1,C2,C3,C4,ALL_DISPLAYED }
: ={M1~M10(or M20 in the CFL
series),UDSK}
QUERY SYNTAX STore_SeTup?
RESPONSE FORMAT STore_SeTup ,
EXAMPLE
The following command selects Channel 1 to be
stored.
Command message:
STST C1, UDSK
RELATED COMMANDS
STORE, INR
WAVEFORM TRANSFER STORE_SETUP, STST
Command /Query