B&K Precision 2552-2559 - Programming Manual - Manual (Page 71)

71
DESCRIPTION The MEASURE_DELY command selects the
type of delay measure.
The response to the MEASURE_DELY?
query indicates the type of delay measure.
COMMAND SYNTAX
MEASURE_DELY
SOURCE,,TYPE,
:= {C1-C2, C1-C3, C1-C4, C2-C3,
C2-C4, C3-C4}
:=
{PHA,FRR,FRF,FFR,FFF,LRR,LRF,LFR,
LFF},
The PHA is phase, the others are the same as
the specified type of the instrument’s delay
measure
QUERY SYNTAX
MEASURE_DELY?
RESPONSE FORMAT
MEASURE_DELY
SOURCE,,TYPE,
EXAMPLE The following instruction sets the type of
delay measure to phase between C1 and C2.
Command message:
MEAD SOURCE,C1-C2,TYPE,PHA
FUNCTION MEASURE_DELY, MEAD
Command /Query