Extron Electronics DMP 128 User Guide - Manual (Page 32)

Presets Drop-down
This drop-down list displays up to 32 presets. Select a preset to
display and either activate (Recall), abort the selection without
either recalling or deleting (Cancel), or delete it (Delete).
notE: An asterisk in the drop-down list indicates a preset exists only in the
DMP 128 and has not been downloaded to DSP Configurator. After recall, the
asterisk is removed.
Mode Buttons
Provides selection between Live mode and Emulate mode (see
Emulate mode and Live mode on page 89).
Backup
In Live mode (connected to a DMP 128), when presets exist in the DMP 128 that are
not present in DSP Configurator (indicated by an asterisk next to the preset name), the
function halts and prompts the user to run a backup.
Backup (File > Backup) automates the recall of presets from the DMP 128 to a DSP
configuration (.edc) file within DSP Configurator, then displays a prompt to save the file to
the hard drive. Backup is unavailable when the DSP Configurator program is in Emulate
mode.
notE: A backup should not be performed during a live event.
DMP 128 • Software Control 26