B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 99)

Manual Documentation Number: EIR618-2SFP-T_4812m 99
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
SNMP System Configuration interface
Trap Configuration
A trap manager is a management station that receives the trap messages
generated by the switch. If no trap manager is defined, no traps will be
issued. Create a trap manager by entering the IP address of the station and
a community string. To define a management station as a trap manager,
assign an IP address, enter the SNMP community strings, and select the
SNMP trap version.
 IP Address: Enter the IP address of the trap manager.
 Community: Enter the community string.
 Trap Version: Select the SNMP trap version type —v1 or v2c.
 Click
Add button.
 To remove the community string, select the community string listed in
the current managers field and click Remove button.