B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 33)

Manual Documentation Number: EIR618-2SFP-T_4812m 33
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Login in the Console Interface
When the connection between Switch and PC is ready, turn on the PC and
run a terminal emulation program or Hyper Terminal and configure its
communication parameters to match the following default characteristics
of the console port:
Baud Rate: 9600 bps
Data Bits: 8
Parity: none
Stop Bit: 1
Flow control: None
The settings of communication parameters
After finishing the parameter settings, c
lick ‗OK’ button. When the blank
screen shows up, press Enter key to bring out the login prompt. Key in
‗root‘ (default value) for both User name and Password (use Enter key to
switch), then press Enter key and the Main Menu of console management