B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 69)

Manual Documentation Number: EIR618-2SFP-T_4812m 69
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
System Event Log - Event Configuration
When the Syslog/SMTP checkbox is marked, the event log will be sent to
system log server/SMTP server. Also, per port log (link up, link down, and
both) events can be sent to the system log server/SMTP server with the
respective checkbox ticked. After configuring, click Apply to have the
setting taken effect.
 System event selection: There are 4 event types —Device cold start,
Device warm start, Authentication Failure, and X-ring topology change.
Before you can tick the checkbox of each event type, the Syslog Client
Mode column on the Syslog Configuration tab/E-mail Alert column on
the SMTP Configuration tab must be enabled first.
 Device cold start: When the device executes cold start action, the
system will issue a log event.
 Device warm start: When the device executes warm start, the
system will issue a log event.
 Authentication Failure: When the SNMP authentication fails, the
system will issue a log event.
 X-ring topology change: When the X-ring topology has changed,
the system will issue a log event.
 Port event selection: Also, before the drop-down menu items are
available, the Syslog Client Mode column on the Syslog Configuration
tab and the E-mail Alert column on the SMTP Configuration tab must
be enabled first. Those drop-down menu items have 3 selections
—Link
UP, Link Down, and Link UP & Link Down. Disable means no event will
be sent to the system log server/SMTP server.
 Link UP: The system will issue a log message when port
connection is up only.
 Link Down: The system will issue a log message when port
connection is down only.
 Link UP & Link Down: The system will issue a log message when
port connection is up and down.