B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 66)

66
Manual Documentation Number: EIR618-2SFP-T_4812m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Restore Configuration interface
TFTP - Backup Configuration
You can save the current configuration from flash ROM to TFTP server for
restoring later.
1. TFTP Server IP Address: Type in the TFTP server IP.
2. Backup File Name: Type in the file name.
3. Click Apply .
Backup Configuration interface
System Event Log
– Syslog Configuration
Configure the system event mode to collect system log.
1. Syslog Client Mode: Select the system log mode
—Client Only,
Server Only, or Both.
2. System Log Server IP Address: Assign the system log server IP.
3. When Syslog Client Mode is set as Client Only, the system event log
will only be sent to the client which has logged in on the switch. When
Syslog Client Mode is set as Server Only, the system log will only be
sent to the syslog server and you have to type the IP address in the
Sysylog Server IP Address column. If the Syslog Client Mode is set as
Both, the system log will be sent to client and server.
4. Click Reload to refresh the events log.
5. Click Clear to clear all current events log.