B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 63)

Manual Documentation Number: EIR618-2SFP-T_4812m 63
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
beginning of the dynamic IP range. For example, dynamic IP is in the
range between 192.168.1.100 ~ 192.168.1.200. In contrast,
192.168.1.100 is the Low IP address.
 High IP Address: Type in an IP address. High IP address is the end of
the dynamic IP range. For example, dynamic IP is in the range between
192.168.1.100 ~ 192.168.1.200. In contrast, 192.168.1.200 is the High
IP address.
 Subnet Mask: Type in the subnet mask of the IP configuration.
 Gateway: Type in the IP address of the gateway in your network.
 DNS: Type in the Domain Name Server IP Address in your network.
 Lease Time (sec): It is the time period that system will reset the
dynamic IP assignment to ensure the dynamic IP will not been
occupied for a long time or the server doesn
‘t know that the dynamic IP
is idle.
 And then, click
Apply
DHCP Server Configuration interface
DHCP Server
– Client Entries
When the DHCP server function is active, the system will collect the DHCP
client information and displays it at this tab.