B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 62)

62
Manual Documentation Number: EIR618-2SFP-T_4812m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
 Gateway: Assign the network gateway for the industrial switch. The
default gateway is 192.168.16.254.
 DNS1: Assign the primary DNS IP address.
 DNS2: Assign the secondary DNS IP address.
 And then, click
Apply
IP configuration interface
DHCP Server
– System configuration
DHCP is the abbreviation of Dynamic Host Configuration Protocol that is a
protocol for assigning dynamic IP addresses to devices on a network. With
dynamic addressing, a device can have a different IP address every time it
connects to the network. In some systems, the device's IP address can
even change while it is still connected. DHCP also supports a mix of static
and dynamic IP addresses. Dynamic addressing simplifies network
administration because the software keeps track of IP addresses rather
than requiring an administrator to manage the task. This means that a new
computer can be added to a network without the hassle of manually
assigning it a unique IP address.
The system provides the DHCP server function. Enable the DHCP server
function, the switch system will be a DHCP server.
 DHCP Server: Enable or Disable the DHCP Server function.
Enable —the switch will be the DHCP server on your local network.
 Low IP Address: Type in an IP address. Low IP address is the