B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 81)

Manual Documentation Number: EIR618-2SFP-T_4812m 81
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
see the local static trunk group information in here.
1. Group Key: Displays the trunk group ID.
2. Port Member: Displays the members of this static trunk group.
Port Trunk —Aggregator Setting interface (two ports are added to the left field with LACP
disable)
Port Trunk – Aggregator Information interface
State Activity
Having set up the LACP aggregator on the tab of Aggregator Setting, you
can configure the state activity for the members of the LACP trunk group.
You can tick or cancel the checkbox beside the state display. When you
remove the tick mark to the port and click Apply button, the port state
activity will change to Passive.
 Active: The port automatically sends LACP protocol packets.
 Passive: The port does not automatically send LACP protocol packets,