B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 16)

16
Manual Documentation Number: EIR618-2SFP-T_4812m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
LED Indicators
The diagnostic LEDs located on the front panel of the industrial switch
provide real-time information of system and optional status. The following
table provides description of the LED status and their meanings for the
switch.
LED Status Meaning
PWR
Green System power on
Off No power inputs
R.M.
Green
The industrial switch is the master device of the
X-Ring group
Off
The industrial switch is not the master device of
the X-Ring group
PWR1
Green Power 1 is active
Off Power 1 is inactive
PWR2
Green Power 2 is active
Off Power 2 is inactive
Fault
Red
PWR1/PWR2 is inactive. (See alarm setting for
operational details)
Off
PWR1 & PWR2 are both active or no power
inputs
P1 ~ P16
Green
(Upper LED)
Connected to network
Blinking
(Upper LED)
Networking is active
Off
(Upper LED)
Not connected to network