B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 78)

78
Manual Documentation Number: EIR618-2SFP-T_4812m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
6. Flow Control: Set flow control function as Enable or Disable. When
enabled, once the device exceed the input data rate of another device
as a result the receiving device will send a PAUSE frame which halts
the transmission of the sender for a specified period of time. When
disabled, the receiving device will drop the packet if too much to
process.
7. Security: Once the Security selection is set as
‗On‘, any access from
the device which connects to this port will be blocked unless the MAC
address of the device is included in the static MAC address table. See
the segment of Static MAC Table.
8. Click Apply button to make the configuration effective.
Port Control interface