B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 95)

Manual Documentation Number: EIR618-2SFP-T_4812m 95
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
RSTP System Configuration interface
RSTP - Port Configuration
You can configure path cost and priority of every port.
 Select the port in the port column field.
 Path Cost: The cost of the path to the other bridge from this
transmitting bridge at the specified port. Enter a number 1 through
200,000,000.
 Priority: Decide which port should be blocked by priority in LAN. Enter
a number 0 through 240 (the port of the highest value will be blocked).
The value of priority must be the multiple of 16.
 Admin P2P: Some of the rapid state transactions that are possible
within RSTP are dependent upon whether the port concerned can only
be connected to exactly one other bridge (i.e. it is served by a