B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 105)

Manual Documentation Number: EIR618-2SFP-T_4812m 105
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
 Port x: Each port has 4 priority levels —High, Middle, Low, and
Lowest
—to be chosen.
 Click
Apply button to make the settings effective.
COS Configuration
Set up the COS priority level. With the drop-down selection item of Priority
Type above being selected as COS only/COS first, this control item will then
be available to set the queuing policy for each port.
 COS priority: Set up the COS priority level 0~7 —High, Middle, Low,
Lowest.
 Click
Apply .
TOS Configuration
Set up the TOS priority. With the drop-down selection item of Priority Type
above being selected as TOS only/TOS first, this control item will then be
available to set the queuing policy for each port.
 TOS priority: The system provides 0~63 TOS priority level. Each level
has 4 types of priority
—High, Middle, Low, and Lowest. The default value is
‗Lowest‘ priority for each level. When the IP packet is received, the system
will check the TOS level value in the IP packet that has received. For
example, the user sets the TOS level 25 as high, the system will check the
TOS value of the received IP packet. If the TOS value of received IP packet
is 25 (priority = high), and then the packet priority will have highest priority.
 Click
Apply button to make the settings effective.