B&B Electronics EIR618-2SFP-T - Manual - Manual (Page 110)

110
Manual Documentation Number: EIR618-2SFP-T_4812m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
Security
In this section, you can configure the 802.1x and MAC address table.
802.1X/Radius Configuration
802.1x is an IEEE authentication specification which prevents the client
from connecting to a wireless access point or wired switch until it provides
authority, like the user name and password that are verified by an
authentication server (such as RADIUS server).
System Configuration
After enabling the IEEE 802.1X function, you can configure the parameters
of this function.
 IEEE 802.1x Protocol: Enable or disable 802.1x protocol.
 Radius Server IP: Assign the RADIUS Server IP address.
 Server Port: Set the UDP destination port for authentication requests
to the specified RADIUS Server.
 Accounting Port: Set the UDP destination port for accounting
requests to the specified RADIUS Server.
 Shared Key: Set an encryption key for using during authentication
sessions with the specified RADIUS server. This key must match the
encryption key used on the RADIUS Server.
 NAS, Identifier: Set the identifier for the RADIUS client.
 Click
Apply button.