V-Tech CAT5 System Technical Guide - Manual (Page 84)

Page 84 K5 System Technical Guide
4.6.1§Distributor
Distributors serves as a branch, they are connected in hand-in –hand-out style in the BUS(BUS
comes out from the door station or from C5-IPC), and function to separate the audio and video
signal from the bus to the monitors, and also power the monitors. Each Distributor has 4 outputs
for the monitors. There are 3 types of distributor available in the system.
4.6.1.1§Connection§Schematic
The input of distributor can come from Door station or C5-IPC.
• Distributor to Door Station
§ § 4.6§Accessory§Parts
C5-F4
C5-F4
1
2
3
4
1R 2W
GD VD T/R+ T/R- Z1 Z2 Z3 Z4 COMCOMPR
3Y 4B FV+FV-P- AU P- P+ P+ D1&D2
C5-AT27
PS5
1 2 3
6 5 4
7 8 9
# 0 *
RF CARD
CN1 CN2
CN-LK
J/KMB JP-LK
Bus EB+ EB- N.O LK+ LK- +12V 1 2 3
T/R- T/R+
IP-MR18
AC
+ -
+ -
To other monitors
PS5
AC + -
+ -
C5-F4
C5-F4
1
2
3
4
1R 2W
GD VD T/R+ T/R- Z1 Z2 Z3 Z4 COMCOMPR
3Y 4B FV+FV-P- AU P- P+ P+ D1&D2
C5-AT27
To other monitors
+ -
To Next C5-F4
Note that VD-SET must be set to 120 if the C5-F4 is the last one of the bus
HI
120
HI
120
HI
120
Note that ID Code(#8001-1) setting in MR18 must be set to 0-F411
CAT5
RVV2*1.0mm
Chapter 4 K5 System Settings