Chapter 2 k5 system parts, C~40, C5-f414 – V-Tech CAT5 System Technical Guide User Manual

Page 26

Page 26

K5 System Technical Guide

• LINK: Signal indicator. Flicker means signal is transmitted in bus

• Power: Power indicator. Always ON

• IN-USE: Status Indicator. ON while working

Specifications

Power supply:

DC24V

Standby current:

8mA

Working current:

80mA

Working temperature:

-10

C~40

Connection port:

RJ45

Dimensions:

88*140*32mm

2.3.4.2§C5-F414

C5-F414 can support four audio and one video channels at the same time while working. It means
four conversations can take place at the same time. One of the conversations can be between
door station and monitor or Switchboard and monitor; other three are intercom calls. Signal sepa-
rator is built inside to protect the system from shutting when one or some of the monitors gets
faulty, to guarantee each monitor in the system work independently.

Parts and Functions

• P+, P-: Power input, DC 24V

• PA: Test button

• S1: DIP Switch

• Power: Power indicator. Always ON

• IN-USE: Status Indicator. ON while working

• LINK: Signal indicator. Flicker means signal is

transmitted in bus

• ERROR: Error indication. ON when equipment

failure

• RS485: PC Port. Set parameters update the

firmware of C5-IPC by PC RS485-USB convertor

• JWB (IN): Bus Signal Input. The port is a RJ45 port includes audio, data & video. It can be con-

nected to last distributor or C5-IPC

• JWB (OUT): Bus Signal Output. The port is a RJ45 port includes audio, data & video. It can be

PORT-A

PORT-B PORT-C PORT-D JWB(IN) JWB(OUT)

VD-SET(L=HIGH)

P- P+ P-

P+ P-

P+

T/R-

ERROR

INUSE

LINK

POWER

T/R+

C5-F414

PORT-B

PORT-C PORT-D JWB(IN) JWB(OUT)

VD-SET

IN-USE

LINK

RS485

POWER

ERROR

Chapter 2 K5 System Parts