1§door§station§setting, 1§door§station§working§mode, 2§§ip-mr9l§configuration – V-Tech CAT5 System Technical Guide User Manual

Page 41: 1§§how§to§enter§debug§mode, Page 41 k5 system technical guide

Page 41

K5 System Technical Guide

§ 4.1§Door§station§Setting

4.1.1§Door§station§working§mode

Door station is to be installed in the entrance, to communicate with monitors or with Switchboard.
Door station can be set to work under two modes:

1. Unit door station

To be installed on the entrance of each separate building, being able to call all the monitors inside
the building

2. Common door station

To be installed on the common entrance, being able to call all the monitors inside the LAN net-
work

4.1.2§§IP-MR9L§Configuration

Door stations can work in Normal mode and Debug mode. Normal mode is for daily function for
tenants; Debug mode is used for the installer, and debug tool can be activated under this mode.

4.1.2.1§§How§to§enter§debug§mode

Door station is to be installed in the entrance, to communicate with monitors or with Switchboard.
Door station can be set to work under two modes:

When Door Station is
standby, press “#” key

Input “9008”, then input Admin
Code (“66666666” by default)

Debug Mode menu is
launched

Working Mode

Function

Normal mode

Daily use for tenants: calling, talking, unlocking

Debug mode

Special mode for installer: quick access to all settings and debug tools

V i d e o E n t r y S y s t e m

- - - - - - - - - - - - - - - - - - - - - - - - - - -

> > D E B U G S T A T E < <

- - - - - - - - - - - - - - - - - - - - - - - - - - -

3 - # M o n i t o r P r o g r a m

2 - # S e t u p

1 - # I n s t a l l e r S e t u p

6 - # O n l i n e D e v i c e s . . .

E X I T: # - 9 0 0 9

5 - # O n l i n e M o n i t o r. . .

- - - - - - - - - - - -To o l s - - - - - - - - - -

4 - # C a r d M a n a g e

V i d e o E n t r y S y s t e m

[ **** ]

S y s t e m R e a d y

V i d e o E n t r y S y s t e m

S y s t e m R e a d y