C~40 – V-Tech CAT5 System Technical Guide User Manual
Page 27
Page 27
K5 System Technical Guide
connected to next distributor
• PORT-A, PORT-B, PORT-C, PORT-D: 4 output, it can be connected to indoor monitors
• VD-SET: Setting for video matching
Specifications
Power supply:
DC24V
Standby current:
60mA
Working current:
120mA
Working temperature:
-10
0
C~40
0
C
Connection port:
RJ45
Dimensions:
140*150*60mm
2.3.4.3§C5-F422
C5-F422 is a advanced distributor which can support two audio and video channels at the same
time. Two conversations with video are available at one system by using this device.
Parts and Functions
• P+, P-: Power input, DC 24V
• PA: Test button
• S1: DIP Switch
• Power: Power indicator. Always ON
• IN-USE: Status Indicator. ON while working
• LINK: Signal indicator. Flicker means signal
is transmitted in bus
• ERROR: Error indication. ON when equip-
ment failure
• RS485: PC Port. Set parameters update the
firmware of C5-IPC by PC RS485-USB convertor
• JWB (IN): Bus Signal Input. The port is a RJ45 port includes audio, data & video. It can be con-
nected to last distributor or C5-IPC
• JWB (OUT): Bus Signal Output. The port is a RJ45 port includes audio, data & video. It can be
connected to next distributor
• PORT-A, PORT-B, PORT-C, PORT-D: 4 outputs, it can be connected to indoor monitors
• VD-SET: Setting for video matching
PORT-A PORT-B PORT-C PORT-D JWB(IN) JWB(OUT)
VD-SET(L=HIGH)
P- P+ P- P+
PA
S1
1
ON
2
T/R-
ERROR
INUSE
LINK
POWER
T/R+
C5-F422
PORT-A
P+ P-
PA
PORT-B
PORT-C PORT-D JWB(IN) JWB(OUT)
VD-SET
S1
IN-USE
LINK
RS485
POWER
ERROR