V-Tech CAT5 System Technical Guide - Manual (Page 74)

Page 74 K5 System Technical Guide
NOTE:
192.168.0.1 & 192.168.0.255 cannot be used by any device in the network.
192.168.0.1
192.168.0.255
• IP address range of C5-IPC
• PC IP address
1 2 3
P+ P- P+ P- RS485
SW1
JWB(IN) JWB(OUT) CN(MDS) ETHERNET
PA VR600
+
S1 POWER
LINK
IN-USE
AG
1
ON DIP
2 3 4 5 6
C5-IPC
192.168.0.2 ---- 192.168.0.239
PC
192.168.0.3 ---- 192.168.0.254
192.168.0.2
IP8210Config
Because default IP address of C5-IPC is 192.168.0.2, it’ll make a conflict if PC is set to 192.168.0.2, then PC can-
not search the C5-IPC. That’s why PC should not be set to 192.168.0.2.
Chapter 4 K5 System Settings