3§monitor§setting, 1§concept§of§address, Chapter 4 k5 system settings – V-Tech CAT5 System Technical Guide User Manual
Page 60: 2§door§lock§controlled§with§external§power, Page 60 k5 system technical guide, Ip-mr18 ac
Page 60
K5 System Technical Guide
LOCK
PS5
1
2
3
6
5
4
7
8
9
#
0
*
RF CARD
CN1
CN2
CN-LK
J/KMB
JP-LK
Bus
EB+ EB-
N.O
LK+
LK-
+12V
1
2
3
T/R- T/R+
IP-MR18
AC
+
-
+ -
To C5-IPC or Distributor
LOCK
Exit Button
Remove the
jumper
POWER
SUPPLY
Note:
1. Please use DC lock and the related DC power supply
2. Remove the JP-LK jumper
3. Set Unlock Output(unlock mode) for diffirent lock types(#8001-3: Unlock Output)
• Power-on-to-unlock type:Unlock Output=0 (by default)
• Power-off-to-unlock type:Unlock Output=1
4.2.2.2§Door§Lock§Controlled§with§External§Power
§
§ 4.3§Monitor§Setting
4.3.1§Concept§of§Address
Address codes are the numbers/letters used by residents, visitors and Switchboard operators to
identify the apartments or villas in the installation. Inside the unit/riser each apartment can be
addressed with a 4 digit code(ABCD),of these 4 digits, the first 2 digits are meant to be the floor
number, while the last 2 digits serves as the monitor code of each floor. There are 2 calling types
when there is cal made to the monitor: Inside call and Outside call.
Chapter 4 K5 System Settings