V-Tech CAT5 System Technical Guide - Manual (Page 149)

Page 149 K5 System Technical Guide
5. Set clock: Synchronize the device time by PC time
6. Set pass rule: Set pass rule for device.( Retails refer to setting rule section)
7. View Pass Rule: View the pass rule in the device
8. Search: Search all the devices to check if it’s online
9. Set Clock All: Synchronize time of all devices by PC time
10. Set Pass Rule All: Set Pass Rule for all devices
11. Check online all: Check all devices if it’s online
12. Report: Display all the device information, including whether online, device name, Device
number, and IP address
13. Refresh All Online: Check all devices if it’s online
14. Close: Exit device configuration window