V-Tech CAT5 System Technical Guide - Manual (Page 67)

Page 67 K5 System Technical Guide
3) Press the button to entry About page
Exit
H/W : T3-753 a1.2
S/W: V11.02.27
Voltage: 22.7V
Local Address: 1002
Remote Number: 0
AL. Delay Time: 40/90
Video Standard: PAL
4) Press the unlock button and hold for 3s when entry about page, then entry Installer Setup page,
just like the following picture shows.
Input 0080 then press Menu button to confirm, then entry room code setting status.
Code Number: [ 0 000]
0010: delete remotes
0011: add remote
0020: set as door bell
0021: not door bell
0022: have door station
0023: no door station
0030: out-delay set
0031: in-delay set
0080: room id set
0090: test armed
0093: direct call gl vd on
0094: direct call gl vd off
8008: MM/DD/YYYY
8009: DD/MM/YYYY
8012: 12 hour format
8013: 24 hour format
2412: restore to default