V-Tech VT584 Manual - Manual

1. Product Features
● 4-wire Door Entry system, compatible with VT6xx series Monitors
● Camera angle adjustable
● Connects up to 5 Monitors
● Suitable for flush mounting
● Can also be surface mounted by rain cover (not included)
2. Parts List
● VT584 Door/bell camera 1 piece
● 4-Pin wire connector 1 piece (to connect Indoor Monitor)
● 3-Pin wire connector 1 piece (to connect lock)
3. Parts and Functions
VT-ENG-584-V2 090S817
1
6
7
8
2
3
4
5
1. Microphone
2. Camera
3. Night-View LED
4. Call Button
5. Speaker
6. Angle Adjust
7. Monitor Port
8. Unlock Port LB
4. Mounting Instruction
35mm
145 cm
1. Cut a hole in 75mm X 75mm X
35mm in the wall. Insert the mounting
bracket and fix with screws.
2. Wire up the cables, and test the
system.
3. Hang the door/bell camera body
on top of the mounting box, then
tighten the screws firmly on the
bottom.
Precautions: Do not install camera/bell where there would be a bright light behind the visitor
(or where there would be a bright background), or in a place where the camera lens would be
directly exposed to sunlight or a bright light. If light shines directly into the outdoor camera lens,
the image will be over-exposed; it will look white or silhouetted. Take precautions against this.
Do not install the unit in places where is constant vibration, extreme heat or unusual external
interference.
VT-584 Outdoor Camera User Manual