EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 74)

2. Select Insert LIVE or DELAY from the menu.
The Insert LIVE or DELAY window opens:
See section "Insert LIVE or DELAY Window" on page 64 for a description of the fields.
3. Select the train in the From Which Feed field.
4. In the IN zone, define the IN point of the inserted train by doing one of the following:
◦ select the Delay radio button and enter a delay value
OR
◦ select the T/C IN radio button and enter a timecode value.
5. In the OUT zone, define the OUT point of the inserted train by doing one of the
following:
◦ select the Unknown radio button.
◦ select the T/C OUT radio button and enter a timecode value
◦ select the Duration radio button and enter a duration value
6. Click the OK button.
The element is inserted in the list before or after the selected element (depending on the
"Insert mode in playlist" parameter of the Tools > Settings > Playlist > Playlist /
General category. See section "General Settings" on page 131.
Insert LIVE or DELAY Window
While inserting a train via the Insert LIVE or DELAY option of the Playlist Element
contextual menu, the Insert LIVE or DELAY window will open. This window makes it
possible to define an IN point and an OUT point for the train which will be inserted into the
playlist.
The window contains the following zones:
64 1. Playlist Panel
EVS Broadcast Equipment S.A. - November 2012 Issue 6.00.B