Remaining time information, Define pre-roll duration, Start on time security warning – EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual User Manual
Page 142: Set new playlist as default playlist, Disable double-click on playlist, Default tc track value, Always validate t/c track at backup

Remaining Time Information
Defines which information will be displayed in the Playlist Panel and on the OSD:
•
Time until next break
•
Time until next unavailable element
An unavailable element is a playlist element that is not available on the XNet network
and can therefore not be played out. This is either a virtual element, an element on an
off-line server, or an element on-line or off-line on the GigE network.
Define Pre-Roll Duration
Defines the pre-roll duration related to the preview transition.
Start on Time Security Warning
A warning message will be displayed when defining a new start-on-time if it is too close to
another start-on-time.
Defines the period of time below which the warning message will be displayed.
Set New Playlist as Default Playlist
This option makes it possible to set a new playlist as the default playlist. Checking this
option will automatically tick the Set as default playlist check box in the Create a New
Playlist window.
Disable Double-Click on Playlist
By default, double-clicking a playlist element will cue and pause the element, so that it is
ready to be played out.
If you tick this option, double-clicking a playlist element will neither cue this element, nor
stop the playlist while it is being played out.
Default TC Track Value
The Regenerate T/C Output command in the Playlist contextual menu allows the user to
regenerate the timecodes for the whole playlist, via the Regenerate Playlist Output
Timecode window. In this window, you can enter a user-defined initial T/C value.
The T/C value defined in this setting is used as the default user-defined value for the initial
T/C value in the Regenerate Playlist Output Timecode window.
Always Validate T/C Track at Backup
If you tick this option, a dialog box pops up each time you request a playlist or timeline
backup. The dialog box allows changing the T/C track of the playlist or timeline.
132
1. Playlist Panel
EVS Broadcast Equipment S.A. - November 2012
Issue 6.00.B