EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 149)

All these actions are described here below.
Parameters
Displays different parameters depending on the type of macro command selected.
GPI: GPI number, type and pulse duration, the position the GPI is linked to and the
eventual delay or advance.
Mute On / Mute Off: the position the Mute tag is linked to and the duration value for the
audio mix transition effect.
Swap Audio: "Audio Sources" -> "Outputs", e.g. a1 -> a3.
Effect: video effect type and duration, audio effect type and duration.
Still/Start Mode: still mode option, start mode option.
Freeze: the position the Freeze tag is linked to, the Freeze duration, mode and type.
Action = None
The corresponding macro command is reset and the parameters zone is cleared.
Action = GPI OUT
When an OUTPUT GPI action is applied to an element at a given timecode, the action
associated to this OUTPUT GPI is triggered at this timecode value.
Selecting GPI OUT action in the Playlist Macro Commands Settings displays the Define
GPI OUT Parameters window.
IPDirector - Version 6.00 - User Manual - Playlist Panel
1. Playlist Panel 139