EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 69)

4. In the Initial T/C Value area, select one of the options available, depending on what
has been selected in the Mode area:
◦ From user defined value
The value defined in the general playlist setting Default TC Track Value is filled
in by default. You can also enter another T/C value which will be used as initial
value.
◦ From LTC IN
◦ From USER T/C IN
5. Select a value in the Generate in fields.
The values displayed and the availability of the Generate in drop-down lists depends
on the option selected in the Mode area and on the video standard, as detailed below.
6. Click OK.
The parameters are saved with the playlist.
When the playlist is loaded on the EVS video server and played out to air, the timecode is
regenerated as specified.
Video Standard
The video standard which will be considered is
• the video standard of the playlist if the playlist is on-line
• the video standard of the first playlist element if the playlist is off-line
• PAL if there is no element in the playlist.
The table below summarizes the values displayed in the Generate in fields.
Definition Standard VITC/HANC Values DROP/Non DROP Availability
SD PAL VITC Hidden
SD NTSC VITC Displayed
HD PAL HANC LTC
HANC VITC
Both HANC LTC and
HANC VITC
Hidden
HD NTSC HANC LTC
HANC VITC
Both HANC LTC and
HANC VITC
Displayed
IPDirector - Version 6.00 - User Manual - Playlist Panel
1. Playlist Panel 59