Playlist settings, Introduction, Common operations on playlist elements – EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual User Manual
Page 140

Common Operations on Playlist Elements
When the following operations are performed on linked clips from linked playlists, the
operation will be performed on the corresponding elements from all the linked playlists of
the group:
•
Delete an element
•
Update an element
•
Move an element within a playlist
•
Insert a playlist in another playlist: the playlist will be inserted as a group into the other
playlist. The behavior is the same as inserting an element into a linked playlist:
1. inserting a linked playlist (from group 1) in another linked playlist (from group 2) will
result in the insertion of the other playlist from the first group into the each of the
playlists of the second group.
2. if there are more playlists in group 2 than in group 1, a warning message will be
displayed to indicate that playlists (from group 2) are now desynchronized.
3. if an unlinked playlist is inserted in a linked playlist, a warning message will be
displayed to indicate that playlists are now desynchronized.
1.8.
Playlist Settings
1.8.1.
Introduction
The default settings and behavior for the Playlist Panel module can be defined in the
Playlist Panel category of the IPDirector Settings window.
Click Tools > Settings to open the IPDirector Settings window.
Then click a sub-category for Playlist settings.
Here you can modify the default settings for Playlist Panel.
130
1. Playlist Panel
EVS Broadcast Equipment S.A. - November 2012
Issue 6.00.B