EVS IPDirector Version 6.0 - November 2012 Part 6 User's Manual - Manual (Page 105)

3. The Freeze at TC field shows the TC IN of the selected playlist element. If needed,
enter the TC value where you want the Freeze effect to start.
The maximum duration, shown below the Duration field, is calculated from the
Freeze at TC value to TC OUT.
4. Do one of the following:
◦ Enter the duration of the Freeze effect in the Duration field. The resulting TC OUT
for the Freeze is calculated and shown in the TC OUT field.
◦ Enter the TC value for the end of the Freeze effect in the TC OUT field. The
duration of the effect is automatically calculated.
5. Select the desired Freeze mode:
Overwrite: The freeze overwrites the images in the element for the duration of the
freeze.
Insert: The freeze is added to the element images, so the total duration of the element
is increased with the duration of the freeze.
6. Select the desired Freeze type:
Freeze on field: The freeze will be applied to the image field.
Freeze on frame: The freeze will be applied to the image frame.
7. Click OK to confirm.
IPDirector - Version 6.00 - User Manual - Playlist Panel
1. Playlist Panel 95