ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 97)

ZyWALL 2 Series User’s Guide
WAN Screens 6-13
Table 6-7 IP Setup
LABEL DESCRIPTION
Windows Networking (NetBIOS over TCP/IP): Windows Networking (NetBIOS over TCP/IP): NetBIOS
(Network Basic Input/Output System) are TCP or UDP broadcast packets that enable a computer to
connect to and communicate with a LAN. For some dial-up services such as PPPoE or PPTP, NetBIOS
packets cause unwanted calls.
Allow between WAN
and LAN Select this check box to forward NetBIOS packets from the LAN to the WAN
and from the WAN to the LAN. If your firewall is enabled with the default policy
set to block WAN to LAN traffic, you also need to enable the default WAN to
LAN firewall rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the
WAN and from the WAN to the LAN.
Allow Trigger Dial Select this option to allow NetBIOS packets to initiate calls.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
6.7 Configuring WAN MAC
To change your ZyWALL’s WAN MAC settings, click WAN, then the WAN MAC tab. The screen appears
as shown.
Figure 6-6 MAC Setup