ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 43)

ZyWALL 2 Series User’s Guide
Introducing the Web Configurator 2-5
Table 2-1 Web Configurator Screens Summary
LINK TAB FUNCTION
General Use this screen to configure general system settings.
DDNS Use this screen to configure Dynamic Domain Name System
settings.
Password Use this screen to change your password.
SYSTEM
Time Setting Use this screen to change your ZyWALL’s time and date.
IP Use this screen to configure LAN DHCP and TCP/IP settings.
Static DHCP Use this screen to assign fixed IP addresses on the LAN.
LAN
IP Alias Use this screen to partition your LAN interface into subnets.
Wireless Use this screen to configure the wireless LAN settings.
MAC Filter Use this screen to change MAC filter settings on the ZyWALL.
WIRELESS LAN
(This feature is
not available on
the ZyWALL 2.)
802.1X Use this screen to configure the ZyWALL’s WLAN authentication
settings.
Route This screen allows you to configure route priority and traffic redirect
properties.
WAN ISP Use this screen to configure Internet Service Provider parameters.
WAN IP Use this screen to configure WAN IP address settings.
WAN MAC Use this screen to configure WAN MAC address settings.
Traffic Redirect Use this screen to configure your traffic redirect properties and
parameters.
WAN
Dial Backup Use this screen to configure the backup WAN dial-up connection.
SUA Server Use this screen to configure servers behind the ZyWALL.
Address
Mapping Use this screen to configure network address translation mapping
rules.
SUA/NAT
Trigger Port Use this screen to change your ZyWALL’s trigger port settings.
STATIC ROUTE IP Static Route Use this screen to configure IP static routes.
Summary This screen shows a summary of the firewall rules, and allows you to
edit/add firewall rules. FIREWALL
Attack Alert Use this screen to configure the threshold for DoS attacks.