beautypg.com

Telnet, 11 telnet – ZyXEL Communications Internet Security Gateway ZyWALL 2 Series User Manual

Page 305

background image

ZyWALL 2 Series User’s Guide

Remote Management Screens

17-19

Step 3.

Use the “put” command to upload a new firmware to the ZyWALL.

Figure 17-17 Secure FTP: Firmware Upload Example

17.11 Telnet

You can configure your ZyWALL for remote Telnet access as shown next.

Figure 17-18 Telnet Configuration on a TCP/IP Network

$ sftp -1 192.168.1.1

Connecting to 192.168.1.1...

The authenticity of host '192.168.1.1 (192.168.1.1)' can't be established.

RSA1 key fingerprint is 21:6c:07:25:7e:f4:75:80:ec:af:bd:d4:3d:80:53:d1.

Are you sure you want to continue connecting (yes/no)? yes

Warning: Permanently added '192.168.1.1' (RSA1) to the list of known hosts.

[email protected]'s password:

sftp> put firmware.bin ras

Uploading firmware.bin to /ras

Read from remote host 192.168.1.1: Connection reset by peer

Connection closed

$