ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 58)

ZyWALL 2 Series User’s Guide
3-12 Wizard Setup
Table 3-6 Wizard 3
LABEL DESCRIPTION
Remote IP Subnet
Mask
Enter the gateway IP subnet mask (if your ISP gave you one) in this field if you
selected Use Fixed IP Address. This field is only available when you select
PPTP encapsulation in the previous wizard screen.
Gateway/Remote IP
Address
Enter the gateway IP address in this field if you selected Use Fixed IP
Address. This field is not available when you select PPPoE encapsulation in
the previous wizard screen.
System DNS Servers (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
machine before you can access it. The ZyWALL uses a system DNS server (in the order you specify here)
to resolve domain names for VPN, DDNS and the time server.
First DNS Server
Second DNS Server
Third DNS Server
Select From ISP if your ISP dynamically assigns DNS server information (and
the ZyWALL's WAN IP address). The field to the right displays the (read-only)
DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the
DNS server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not
configure a system DNS server, you must use IP addresses when configuring
VPN, DDNS and the time server.
WAN MAC Address The MAC address field allows you to configure the WAN port's MAC Address by
either using the factory default or cloning the MAC address from a computer on
your LAN.
Factory Default Select this option to use the factory assigned default MAC Address.
Spoof this Computer's
MAC address - IP
Address
Select this option and enter the IP address of the computer on the LAN whose
MAC you are cloning. Once it is successfully configured, the address will be
copied to the rom file (ZyNOS configuration file). It will not change unless you
change the setting or upload a different rom file. It is advisable to clone the
MAC address from a computer on your LAN even if your ISP does not presently
require MAC address authentication.
Back Click Back to return to the previous screen.
Finish Click Finish to complete and save the wizard setup.
3.5 Basic Setup Complete
Well done! You have successfully set up your ZyWALL to operate on your network and access the Internet.