ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 346)

ZyWALL 2 Series User’s Guide
20-4 Maintenance
Table 20-2 System Status: Show Statistics
LABEL DESCRIPTION
Stop Click Stop to stop refreshing statistics, click Stop.
20.3 DHCP Table Screen
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the ZyWALL as a DHCP server or disable
it. When configured as a server, the ZyWALL provides the TCP/IP configuration for the clients. If set to
None, DHCP service will be disabled and you must have another DHCP server on your LAN, or else the
computer must be manually configured.
Click MAINTENANCE, and then the DHCP Table tab. Read-only information here relates to your DHCP
status. The DHCP table shows current DHCP client information (including IP Address, Host Name and
MAC Address) of all network clients using the DHCP server.
Figure 20-3 DHCP Table
The following table describes the labels in this screen.
Table 20-3 DHCP Table
LABEL DESCRIPTION
# This is the index number of the host computer.