ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 369)

ZyWALL 2 Series User’s Guide
WAN and Dial Backup Setup 23-3
The following table describes the fields in this menu.
Table 23-2 Menu 2: Dial Backup Setup
FIELD DESCRIPTION EXAMPLE
Dial-Backup:
Active Use this field to turn the dial-backup feature on (Yes) or off (No). No
Phone
Number Enter the telephone number assigned to your line by your telephone
company. This field only accepts digits; do not include dashes and
spaces. 1234567
Port Speed Press [SPACE BAR] and then press [ENTER] to select the speed of
the connection between the Dial Backup port and the external device.
Available speeds are:
9600, 19200, 38400, 57600, 115200 or 230400 bps.
9600
AT Command
String:
Init Enter the AT command string to initialize the WAN device. Consult the
manual of your WAN device connected to your Dial Backup port for
specific AT commands. at&fs0=0
Edit
Advanced
Setup To edit the advanced setup for the Dial Backup port, move the cursor
to this field; press the [SPACE BAR] to select Yes and then press
[ENTER] to go to Menu 2.1: Advanced Setup. Yes
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.
23.4 Advanced WAN Setup
Consult the manual of your WAN device connected to your Dial Backup port for
specific AT commands.
To edit the advanced setup for the Dial Backup port, move the cursor to the Edit Advanced Setup field in
Menu 2 - WAN Setup, press the [SPACE BAR] to select Yes and then press [ENTER].