ZyXEL Communications Internet Security Gateway ZyWALL 2 Series - Manual (Page 306)

ZyWALL 2 Series User’s Guide
17-20 Remote Management Screens
17.12 Configuring TELNET
Click REMOTE MGNT to open the TELNET screen.
Figure 17-19 Telnet
The following table describes the labels in this screen.
Table 17-3 Telnet
LABEL DESCRIPTION
Server Port You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access Select the interface(s) through which a computer may access the ZyWALL using this
service.
Secure Client IP
Address A secure client is a “trusted” computer that is allowed to communicate with the
ZyWALL using this service.
Select All to allow any computer to access the ZyWALL using this service.
Choose Selected to just allow the computer with the IP address that you specify to
access the ZyWALL using this service.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.